Показаны все результаты (15)Цены: по возрастанию
Cruiser Log is supplied complete with transducer, weather cover etc. Features: Very large display, Speed range: 1-30 knots in 0.1 knot increments, Blue backlighting, Trip and Total logs, Keypad calibration adjustment, Complete with paddlewheel sensor with 7 metres of cable, Simple Operation, Low current consumption – 8 mA @ 12 V + 20 mA for…
Cruiser Depth is supplied complete with transducer, weather cover etc. Very large display. Features: Depth range: 0.8 to 100 metres, Shallow and deep alarms, Blue backlighting, Keel offset, Simple Operation, Compete with transducer and 7 metres of cable, Low current consumption – 10 mA @ 12 V + 20 mA for backlight, Dimensions: 132 x…
Compatible with the following instruments: ST70*; ST60+; ST290. Compatible hull material: aluminum and fiberglass. Cable: 14 m cable. Hole diameter for installation: 2″. *Using with ST70 requires purchase of ST70 Speed Pod, sold separately.
The BM-1 (12 V) is designed to monitor performance of 12 V lead acid battery systems, including AGM and GEL types with capacities of up to 600 Amp hours. It is supplied complete with a precision 100 AMP shunt and a prefabricated cable assembly to enable simple DIY installation. The unit continuously monitors voltage, current…
The BM-1 (24 V) is designed to monitor performance of 24 V lead acid battery systems, including AGM and GEL types. It is supplied complete with a precision 100 Amp. shunt and a prefabricated cable assembly to enable simple DIY installation. The unit continuously monitors voltage, current (charge or discharge), number of amp/hours (charge or…
Well proven paddlewheel speed and distance log with giant digits for easy viewing. Supplied complete with display unit, paddlewheel sensor with 7 metres of cable, weather cover and blanking cap. Features: 40 mm high digits, Speed (Knots/m.p.h.), Trip Distance (N.Miles / Miles), Total Distance (N.Miles / Miles), Trend indicator shows acceleration / deceleration, Selectable speed…
Best selling Depth sounder with giant 40 mm high digits for easy viewing. The outstanding Clipper range of instruments incorporate technically advanced electronics in an industry standard 110 mm square case. Supplied complete with in hull depth transducer with 7 metre cable. Features: 40 mm high digits, Depth below transducer / below keel / below…
Contemporary Design with very large display makes it very easy to operate. Features: Very large display, Digital bearing and programmable analogue steer to course indicator, Automatic compensation routine, Blue backlighting, Simple Operation, Sealed and fully gimballed sensor with 10 metres of cable, Low current consumption – 20 mA @ 12 V + 20 mA for…
Best selling combined Speed/Distance Log and Echo Sounder in standard 110 mm square size. Suitable for open cockpit mounting. Supplied complete with paddlewheel transducer and in hull depth transducer. Features: Depth Sounder in feet and metres, Shallow Alarm and Keel Offset, Complete with well proven transducers, Speed in MPH , Knots and km/h, Trip and…
Compatible with the following instruments: ST70*; ST60+; ST290. Compatible hull material: wood and fiberglass. Cable: 14 m cable. Hole diameter for installation: 2″. *Using with ST70 requires purchase of ST70 Speed Pod, sold separately.
The Clipper Wind system shares the same 110 mm square case as its sister instruments in the Clipper range. The display is exceptionally large and clear, with 60 segments for full 360 degree direction indication. Windspeed is shown in knots, mph or m/s. The pointer style is selectable, from the single segment shown above, to…
A high performance instrument system that shows almost instantaneous changes of wind speed and direction. In demanding conditions, where high performance is essential, the Clipper Tactical wind system is the ideal choice. With ten updates every second it responds very quickly to the changes in wind speed and direction, which occur during tricky manoeuvres. The…
Raymarine Rotavectra wind sensor with 20 m cable. Fits with ST40/ST60+ series.
Wind transducer compatible with: ST70*; ST60+; ST290. Standard length: 14 1/2″. *Using with ST70, ST70 Plus requires purchase of ST70 Wind Pod, sold separately.
Wind transducer compatible with: ST70*; ST60+; ST290. Standard length 14 1/2″ Includes 30 m cable. *Using with ST70, ST70 Plus requires purchase of ST70 Wind Pod, sold separately.
Ja see on kõik, tooted said otsa
Ja see on kõik, tooted said otsa
